Content
Tel: 01384 413815

Contact us


* Denotes required field.
contact form hidden

Edge trims and closures

Edge trims are made from top quality matt, bonded with premium grade resin.

Listed below are the main trims needed to lay a glass fibre roof, however a more extensive range is available to purchase from Seamless Coatings as required. A full list of trims, corners and closures along with the intended usage of these items can be found in our Application Guide click here to view the Application Guide.
  • Edge trims are manufactured in GRP. One side has a matt, high adhesion finish, the other has a glossy finish, always bond to the matt finish.
  • All trims must be fixed with nails or staples to the decking board. With the exception of the F300 Flat Flashing and the D260 Angle Fillet, these trims must be bonded in place with polyurethane (PU) adhesive
  • Silicone sealant or general-purpose mastics are not suitable for the fixing of trims

Raised Edge Trim

A single batten is fixed level with the top edge of the deck.
Liquid Roof Coatings,  wall coatings floor

Drip Trim

Fitted to the lowest edge of the roof usually where the rainwater flows into the gutter.
Liquid Roof Coatings,  wall coatings floor

Lead Flashing and Fillet Trim

Used wherever the laminate needs to cover an area which continues perpendicular to another laminated surface.
Liquid Roof Coatings,  wall coatings floor

Int/Ext Trim

Used wherever the laminate needs to cover an area which continues perpendicular to another laminated surface.
Liquid Roof Coatings,  wall coatings floor

Flat Sheeting Trim

Used mainly at the intersection of a pitched roof and a flat roof, often found on dormers.
brochure download latest,  Accessories

Soffit Trim

Used as a fascia trim for concrete roofing or an similar application which requires an over-sized soffit trim.
brochure download latest,  Accessories

Closures

Apply a thin line of PU trim adhesive to the end of the rolled trim and overlap the closure by at least 50mm then press the trims together firmly to ensure that the adhesive seals the gap. Nail the trim to the decking and laminate over the complete section.

Roof Ridge Closure
brochure download latest,  Accessories
Rolled Ridge Closure
brochure download latest,  Accessories